Most of us rely on the water that is piped through to our homes. In fact we take you through granted that it will always be there, and always be pure enough for us to use when cooking, and in our drinks. It plays a very important part in everything that we do.
However, we often hear stories of the supply becoming contaminated. These are accompanied by people becoming extremely sick, something that we do not want to happen to our children. In order to reassure ourselves, we can now use a drinking water test kit to monitor the state of our water supply.
If we get our supply from the local authority we would naturally assume that they test to make sure that their customers stay safe. When it leaves their filtration system it is as pure as they can make it, but before it reaches your home it goes through miles of pipework, and then to your shower heads and faucets. All of these can be contaminated, and whereas the pipework may be the responsibility of the local utility company, they are not responsible for what is inside your home.
If any part of the system that it passes through has not been well maintained there is a good possibility that corrosion has set in. Pollutants such as agricultural fertiliser, harmful chemicals, and lead could easily have got into the supply. All of these can be tested for impurities to make sure that your family is kept safe.
Some people find it hard to believe that it can cause a whole host of diseases, some fatal, to a family. These can include such things as legionnaires disease, lead poisoning, and heart problems. It only takes a small investment on your part to have a means of testing your own personal water supply.
Before these kits became available you could send samples to the local laboratory if you were at all concerned. However, this was extremely expensive and time-consuming. These kits make it possible for you to do initial tests and if you feel that there is a problem, then forward the samples to either the local supplier or an independent laboratory.
A lot of the bacteria and viruses that can cause problems to humans and animals do not actually smell or affect the taste of the liquid, so this is where the concerned person must carry out tests. It is important that you understand the results, or you could get extremely worried. There will always be some pollutants in the water, but they have to reach certain levels before they can cause any harm.
Unless you are highly qualified chemist, you should pass on any doubts to a specialist. If any member of the household is pregnant, or under 12 months old, these precautions are vital. It is far better to lean on the side of safety in cases like this, and nobody will feel that you are wasting their time doing so.
However, we often hear stories of the supply becoming contaminated. These are accompanied by people becoming extremely sick, something that we do not want to happen to our children. In order to reassure ourselves, we can now use a drinking water test kit to monitor the state of our water supply.
If we get our supply from the local authority we would naturally assume that they test to make sure that their customers stay safe. When it leaves their filtration system it is as pure as they can make it, but before it reaches your home it goes through miles of pipework, and then to your shower heads and faucets. All of these can be contaminated, and whereas the pipework may be the responsibility of the local utility company, they are not responsible for what is inside your home.
If any part of the system that it passes through has not been well maintained there is a good possibility that corrosion has set in. Pollutants such as agricultural fertiliser, harmful chemicals, and lead could easily have got into the supply. All of these can be tested for impurities to make sure that your family is kept safe.
Some people find it hard to believe that it can cause a whole host of diseases, some fatal, to a family. These can include such things as legionnaires disease, lead poisoning, and heart problems. It only takes a small investment on your part to have a means of testing your own personal water supply.
Before these kits became available you could send samples to the local laboratory if you were at all concerned. However, this was extremely expensive and time-consuming. These kits make it possible for you to do initial tests and if you feel that there is a problem, then forward the samples to either the local supplier or an independent laboratory.
A lot of the bacteria and viruses that can cause problems to humans and animals do not actually smell or affect the taste of the liquid, so this is where the concerned person must carry out tests. It is important that you understand the results, or you could get extremely worried. There will always be some pollutants in the water, but they have to reach certain levels before they can cause any harm.
Unless you are highly qualified chemist, you should pass on any doubts to a specialist. If any member of the household is pregnant, or under 12 months old, these precautions are vital. It is far better to lean on the side of safety in cases like this, and nobody will feel that you are wasting their time doing so.
No comments:
Post a Comment