In order to determine whether the water from wells is safe for consumption and households, it is prudent that you take a sample to a lab for accurate confirmation on safety. In some cases health problems develop gradually over the years and become fatal once they reach full blast. It is unwise to come into conclusion that your borehole is free from contamination just because the borehole of your neighbor has tested to be safe. Factors such as underground geology including surface, well construction as well as how deep it goes all contribute to aqua safety. It is thus highly advisable that your regularly conduct a well water testing so as to be safe from water borne diseases.
This can change seasonally in terms of quality. The heavy rains, the system running dry and refilling it as well as over time are some of the factors responsible for water change in quality. The testing is therefore vital and the got results ought to be stored for future reference. It should be noted that individuals owning a private borehole is their responsibility to ensure regular borehole test has taken place.
By ensuring that the crack in the casing are fixed you take an important step to ensure safety. The H2O may look and taste fine but several harmful substances that cannot be tasted or smell is present. These substances include; chemicals and bacteria. The way to the well of such substances can be septic systems, seeping of fertilizers from the surface hence contaminating ground H2O.
It is recommendable to test your water yearly for bacteria. Once it has been contaminated, a variation of infectious diseases which include hepatitis, dysentery, salmonellosis and giardiasis are very common. These diseases come with various symptoms which include vomiting, nausea and diarrhea. In order to access this bacterial safety, it should be tested for coliform bacteria.
Some of the bacteria do not essentially pose to bring diseases though their existence confirms that the system is already contaminated. In case of presence of coliform, it is recommended to boil the water at first before consuming or cooking and also disinfecting the whole system. The sewage system should be maintained properly so as to reduce the probabilities of fouling the entire well.
If it happens that the results are prove of contamination, the water must not be used until the bacteria is identified and treated accordingly and after resampling ought to be done. The results pose an immediate health concern. The responsibility to ensure treatment is done before usage lies with the owner. The short term remedy to this problem is to have the H2O boiled before use
Long term treatment will be of greater value so as to be safe and in peace with your well. Various methods of effectively treating the well by removing several contaminants are available at disposal. With respect to the identified quality of harms identified the local DWO must be able to give you advice on the best form of treatment. Selecting of devices for treatment to make use of, follow ups and upkeep are what in most cases concerns the private owner.
Once the treatment is done, its important to carry out regular sampling to ensure safety of drinking water. If the results are good abrupt health concerns are improbable, however the long term solution should be considered to eliminate contaminants.
This can change seasonally in terms of quality. The heavy rains, the system running dry and refilling it as well as over time are some of the factors responsible for water change in quality. The testing is therefore vital and the got results ought to be stored for future reference. It should be noted that individuals owning a private borehole is their responsibility to ensure regular borehole test has taken place.
By ensuring that the crack in the casing are fixed you take an important step to ensure safety. The H2O may look and taste fine but several harmful substances that cannot be tasted or smell is present. These substances include; chemicals and bacteria. The way to the well of such substances can be septic systems, seeping of fertilizers from the surface hence contaminating ground H2O.
It is recommendable to test your water yearly for bacteria. Once it has been contaminated, a variation of infectious diseases which include hepatitis, dysentery, salmonellosis and giardiasis are very common. These diseases come with various symptoms which include vomiting, nausea and diarrhea. In order to access this bacterial safety, it should be tested for coliform bacteria.
Some of the bacteria do not essentially pose to bring diseases though their existence confirms that the system is already contaminated. In case of presence of coliform, it is recommended to boil the water at first before consuming or cooking and also disinfecting the whole system. The sewage system should be maintained properly so as to reduce the probabilities of fouling the entire well.
If it happens that the results are prove of contamination, the water must not be used until the bacteria is identified and treated accordingly and after resampling ought to be done. The results pose an immediate health concern. The responsibility to ensure treatment is done before usage lies with the owner. The short term remedy to this problem is to have the H2O boiled before use
Long term treatment will be of greater value so as to be safe and in peace with your well. Various methods of effectively treating the well by removing several contaminants are available at disposal. With respect to the identified quality of harms identified the local DWO must be able to give you advice on the best form of treatment. Selecting of devices for treatment to make use of, follow ups and upkeep are what in most cases concerns the private owner.
Once the treatment is done, its important to carry out regular sampling to ensure safety of drinking water. If the results are good abrupt health concerns are improbable, however the long term solution should be considered to eliminate contaminants.
No comments:
Post a Comment